+ETM Unsolicited Response Codes (URCs)

AnyNet SMARTconnect™ adds the following Eseye URCs to the modem. All ETM URCs are prefixed +ETM:.

You will continue to observe other URCs from the Cinterion® PLS62‑W Wireless Module.

For information about all other URCs, see the relevant Thales documentation. For more information, contact Thales or their channel partner.

URC	Description
+ETM:EMQRDY	ETM has entered MQTT mode and is ready to accept any `AT+EMQ...` commands. Prior to this, only `AT+ETM...` commands are accepted.
+ETM:IDLE	The modem has started up and is ready for commands.
+ETM:REBOOTING	The modem will shortly restart. Wait for +ETM:IDLE before sending commands. Configure automatic rebooting using `update_autoreboot` in the configuration file. For more information, see Using the Cinterion® PLS62‑W Wireless Module configuration file.
+ETM: UNABLE TO OPEN MQTT	The Cinterion® PLS62‑W Wireless Module has the certificates, and has tried and failed to open the data connection. No action required. The system will automatically restart in 30 minutes.
+ETMSTATE:<StateID> where <StateID> is the current connectivity state of the Cinterion® PLS62‑W Wireless Module.	Enable this response using the `AT+ETMSTATE` write command. For more information, see ETMSTATE – check current state.
+ETM:SYSSTART	Indicates that AnyNet SMARTconnect™ application has started.

Where to next?