Configuring your system to send and receive data

Before you can send and receive data between your thing and the cloud, you need to:

  1. Prepare the cloud.

    For more information, seeGetting Started: preparing the cloud.

  2. Install AnyNet IRIS.

    For more information, seeInstalling AnyNet IRIS.

  3. Create your thing in AWS IoT Console.

    For more information, see Creating a thing in AWS IoT Core.

  4. Connect the Cinterion® PLS62‑W Wireless Module to a cellular network.

    For more information, see Establishing a cellular connection on the Intelligent Cloud Connect .

  5. Provision the Cinterion® PLS62‑W Wireless Module.

    For more information, see Where to next? .

  6. Use a terminal emulator to send commands to the Cinterion® PLS62‑W Wireless Module.

    For information about setting up the terminal emulator, see Attaching to the Intelligent Cloud Connect.

  7. Test that you can send data from your thing to the cloud.

    For more information, see Sending data from your thing to the cloud .

  8. Test that you can send data from the cloud to your thing.

    For more information, see Sending data from the cloud to your thing .

  9. Your system is now ready. Use AT commands to configure how data is sent and received between the cloud and the modem.

    For more information, see General AT Commands for the Cinterion® PLS62‑W Wireless Module .

Related resources