Management AT commands

Where to next?

• AnyNet SMARTconnect™ AT Commands
• MQTT AT commands
• ETMCFG – read and write configuration file values
• ETMCFGCHECK – checks if a new ETM configuration file is available
• ETMHFWCONF – confirms the new host firmware is applied
• Example
• ETMHFWREAD – reads a section of the new host firmware image
• ETMINFO – displays AnyNet SMARTconnect™ and device information
• ETMRESET – reboot the modem
• ETMSTATE – check current state
• +ETM Unsolicited Response Codes (URCs)
• MQTT Rx Queue
• General AT Commands