Active and static routes

Active routes

View active routes configured on the router.

Active routes

#	Field name	Value	Explanation
1	Destination	IP address	Destination network address.
2	Netmask	IP netmask	Defines the addresses covered by the route.
3	Interface	ethwan / cellpri	Interface used by the route.
4	Gateway	IP address	Next-hop address for matching traffic.
5	Cost	Numerical value	Route weight. Lower cost takes priority between identical routes.

Static Routes

Configure routes under the Static routes heading. Apply routes to a single address or a range by changing the netmask.

Destination IP	Subnet mask	Outcome
192.168.55.161	255.255.255.255	Applies only to 192.168.55.161.
192.168.55.0	255.255.255.0	Applies to 192.168.55.0–192.168.55.255.
192.168.55.240	255.255.255.240	Applies to 192.168.55.240–192.168.55.255.
192.168.55.161	255.255.255.0	Applies to 192.168.55.0–192.168.55.255.
192.168.0.0	255.255.0.0	Applies to 192.168.0.0–192.168.255.255.

Static routes example

#	Field name	Value	Explanation
1	Name	String	Friendly name for the static route.
2	Destination	IP address	Destination network address.
3	Netmask	IP netmask	Defines the addresses covered by the route.
4	Interface	ethwan / cellpri	Interface used by the route.
5	Gateway	IP address	Next-hop address for matching traffic.
6	Cost	Numerical value	Route weight. Lower cost takes priority between identical routes.