Wireless
Wireless Configuration
Configure the Hera 204 wireless interface. The router uses a 2.4/5 GHz dual-band radio.
1. Hardware Mode
802.11g
Selects the 802.11 standard. Options work with the bandwidth setting.
2. Status
Enabled
Shows whether the radio is enabled or disabled.
3. Country
USA (United States of America)
Ensures local compliance and compatibility. Available channels vary by country.
4. Channel
Auto
Wi-Fi channel used by the Hera 204 radio. Availability depends on hardware mode and country.
5. Bandwidth
802.11ac rates 80MHz
Selects bandwidth rates. Options vary by hardware mode.
How wireless configuration works
2.4 GHz mode: The wireless module selects 2.4 GHz mode when Hardware Mode is 802.11b or 802.11g.
With 802.11g, select 20 MHz or 40 MHz bandwidth to enable 802.11n mode on 2.4 GHz.
5 GHz mode: The wireless module selects 5 GHz mode when Hardware Mode is 802.11a.
Use Bandwidth to upgrade from 802.11a to 802.11n or 802.11ac. Available bandwidth ranges from 20 MHz to 80 MHz.
Access Points
Configure wireless access points on the Hera 204 router.
1. Name
Default_radio0
Name for the access point.
2. Device
Wifi0
Always set to Wifi0.
3. Status
Enabled/Disabled
Enables or disables the access point.
4. Network Name
Hera200AccessPoint
Wireless network name shown to nearby devices.
5. SSID Visibility
Broadcast/Hidden
Hidden SSIDs must be entered manually by clients.
6. Security
None/WEP Open System/WEP Shared Key/WPA-PSK/WPA-PSK2
Wireless encryption level, from least to most secure.
7. Pass phrase
Unique Password
Password required to join the SSID.
8. MAC Filter
No filtering/Allow/Deny
Allows all clients, creates an allowlist, or creates a denylist.
9. Filtered MAC address
One or more MAC addresses
Specifies one or more MAC addresses.
For Wireless Client configuration, contact Eseye Support or Device Management.
Last updated
Was this helpful?