Set up the Ethernet WAN connection

Configure Ethernet WAN addressing in the Setup Wizard.

This page does not appear in Cellular only mode.

Configure the Ethernet WAN interface with DHCP or a static IP address.

Set up the connection (Ethernet WAN)

Field	Type	Description
1	Address assignment	Select Static or DHCP. This setting determines whether the interface receives an address manually or dynamically.
2	WAN IP address	For static addressing, enter the Ethernet WAN address. For DHCP, this field shows the assigned address.
3	Netmask	For static addressing, enter the subnet mask. For DHCP, this field shows the assigned netmask.
4	DNS addresses	For static addressing, enter one or more DNS server IP addresses.
5	Obtain gateway from DHCP	Controls whether the DHCP server provides the gateway. Set this to Yes in most deployments.
	Obtain DNS from DHCP	Controls whether the DHCP server provides DNS server addresses.
6	Gateway	Gateway address for the site's access router.
7	Use PPPoE/Username/Password/MTU	Enables a PPPoE connection and configures its username, password, and MTU.