Basic settings

Configure router identity, networks, serial ports, routes, and firewall rules.

Use Basic Settings to configure the Hera 604 network interfaces, wireless access points, serial ports, routes, and firewall.

Important: Changes to LAN, WAN, mobile, or wireless settings can interrupt your connection to the router. Before saving, confirm how you will reconnect if the current interface or IP address changes.

Pages labelled Status (read only) display current operating values and do not change the configuration. For explanations of those values, see System Status.

After changing a page, select Save to apply the new values. Select Reset to discard changes that have not been saved.

#	Section	What you set here
1	Router	The site name, site location, notes, and GPS receiver.
2	Local Area Network (LAN)	The router address, DHCP server, and reserved addresses for specific devices.
3	Wireless Network	The 2.4 GHz and 5 GHz radios, and the access points that run on them.
4	Mobile Network	Cellular profiles and the SIM each profile uses.
5	Wide Area Network (WAN)	The Ethernet WAN connection.
6	Serial Ports	The line settings for serial port 1 and serial port 2.
7	Routing	Static routes and the active routes.
8	Security	The firewall, including inbound rules, outbound rules, and port redirections.

Each section holds one or more pages. The pages appear on the left after you open a section.

Sections marked Status (read only) show current values. You cannot edit them.