Router

Set the site name and location

Use the Router pages to identify the Hera 604, check its current operating status, and record where the unit is installed. The status page is read only; the name and location page contains settings that an operator can update.

Status (read only)

Open Basic Settings > Router > Status (read only) to view identification and operating information for the Hera 604, including its serial number, software versions, last restart time, and uptime.

The values on this page cannot be edited. Select the refresh icon to retrieve the latest information. For a full explanation of the displayed fields, see System Status > Router.

Name and location

Open Basic Settings > Router > Name and location to identify where the Hera 604 is installed and record site-specific information.

Field	Example	Description
Site name	Default	Name used to identify the site where the Hera 604 is installed. Use the site name defined in the deployment record.
Site location	Default	Address, room, cabinet, or other description of the router's physical location.
GPS	Enabled or Disabled	Enables or disables the GPS receiver. Enable it only when GPS is required for the deployment and the GPS antenna has been installed.
Notes	1038-6_Wifi	Represent the configuration version

To update the details:

1. Enter the Site name.
2. Enter the Site location.
3. Enable GPS if it is required for the installation.
4. Select Save.