Connect Hera 604

Connect a computer to the Hera604 through Wi-Fi or Ethernet.

Check that the Hera is mounted, powered on, and running. The Power, Wifi, Signal, LAN or Wan LED must be green.

Connect over Wi-Fi

The Wi-Fi network name and passphrase are provided in the Quick Start Guide supplied with the Hera 604.

1. Check that the Wi-Fi LED on the Hera is lit.
2. On your computer, search for available wireless networks.
3. Select the network name shown in the Quick Start Guide.
4. Enter the passphrase exactly as printed, including capitalization.

Your computer connects to the Hera.

Connect over Ethernet

Use an Ethernet cable to connect from the Hera Ethernet port Link2 to a PC or laptop, either directly or via an Ethernet switch.

The Hera assigns an address to your computer automatically. Most computers already accept automatic addresses.

If your Ethernet connection does not get an address

Set the Ethernet adapter to use automatic addressing:

Windows

1. Open Network Connections.
2. In Network Connections, right-click the Ethernet adapter.
3. Select Properties.
4. In the adapter properties, select Internet Protocol Version 4 (TCP/IPv4).
5. Select Properties.
6. Select Obtain an IP address automatically.
7. Select Obtain DNS server address automatically.
8. Select OK.

macOS

1. Open System Settings.
2. In System Settings, select Network.
3. Select the Ethernet connection.
4. Select Details.
5. On the TCP/IP tab, set Configure IPv4 to Using DHCP.
6. Select OK.