CSQ – request signal quality
This command returns the received signal strength (rssi) and the channel bit error rate (ber).
Type
Syntax
Returned Result
Test
AT+CSQ=?
+CSQ: (0-31,99),(0-7,99)
OK
where:
(0-31, 99)is the list of supported <rssi>s(0-7,99)is the list of supported <ber>s
Execute
AT+CSQ
+CSQ: <rssi>,<ber>
OK
where:
<rssi>is either:0– -113dBm or less1– -111dBm2...30– -109... -53dBm31– -51dBm or greater99– Not known or not detectable
<ber> is either
0-7– between 0.2% and 12.8%.For more information, consult the RXQUAL values in the following table:
3Gpp TS 45.008 subclause 8.2.4
99– Not known or not detectable
or
+CME ERROR: <err> – the command failed.
Example
AT+CSQ
+CSQ: 3,99
OKLast updated
Was this helpful?