> For the complete documentation index, see [llms.txt](https://docs.eseye.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.eseye.com/modules/cinterion-r-els61-wireless-module/management-at-commands/etm-unsolicited-response-codes-urcs.md).

# +ETM Unsolicited Response Codes (URCs)

AnyNet SMARTconnect™ adds the following Eseye URCs to the modem. All ETM URCs are prefixed `+ETM:`.

You will continue to observe other URCs from the Cinterion® ELS61 Wireless Module.

{% hint style="info" %}
For information about all other URCs, see the relevant Thales documentation. For more information, contact Thales or their channel partner.
{% endhint %}

| URC                                                                                                                                                     | Description                                                                                                                                                                                                                                                                                                                                                                                   |
| ------------------------------------------------------------------------------------------------------------------------------------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| `+ETM:EMQRDY`                                                                                                                                           | ETM has entered MQTT mode and is ready to accept any `AT+EMQ...` commands. Prior to this, only `AT+ETM...`commands are accepted.                                                                                                                                                                                                                                                              |
| `+ETM:IDLE`                                                                                                                                             | The modem has started up and is ready for commands.                                                                                                                                                                                                                                                                                                                                           |
| `+ETM:REBOOTING`                                                                                                                                        | The modem will shortly restart. Wait for `+ETM:IDLE` before sending commands. Configure automatic rebooting using `update_autoreboot` in the configuration file. For more information, see [Using the Cinterion® ELS61 Wireless Module configuration file](https://docs.eseye.com/modules/cinterion-r-els61-wireless-module/using-the-cinterion-els61-wireless-module-configuration-file.md). |
| <p><code>+ETMSTATE:\<StateID></code></p><p>where <code>\<StateID></code> is the current connectivity state of the Cinterion® ELS61 Wireless Module.</p> | Enable this response using the `AT+ETMSTATE` write command. For more information, see [ETMSTATE – check current state](https://docs.eseye.com/modules/cinterion-r-els61-wireless-module/management-at-commands/etmstate-check-current-state.md).                                                                                                                                              |
| `+ETM:SYSSTART`                                                                                                                                         | Indicates that AnyNet SMARTconnect™ application has started.                                                                                                                                                                                                                                                                                                                                  |


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.eseye.com/modules/cinterion-r-els61-wireless-module/management-at-commands/etm-unsolicited-response-codes-urcs.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
